My Account
0 View Cart

SuperScrape Impressions Mat Specifications

CONSTRUCTION
Material: Nitrile rubber
Logo/Image Material: Polymetric film
Thickness: 3/16 inch (0.1875")

STANDARDS & TESTIN

  • Certified high-traction by the National Floor Safety Institute (NFSI)
  • Passes DOC-FF1-70 for surface flammability
  • ASTM C1028-96 static coefficient of friction:
         Dry 0.86
         Wet 0.72

Design Specifications

A digital print on polymetric film allows customers to customize the SuperScrape mat with logos, images, and messages.  PMS colors may be matched for an additional fee.*

  • Minimum Text Height: 1/2" (includes lowercase text)
  • Minimum Line Thickness: 1/16"

These text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.

The background color of the imprint area should not be set to white.  It is difficult to keep the logo clean through the manufacturing process.

Powerclips in CorelDraw files must be avoided.  

*We will do our best to match a PMS color, however, color matching can be extremely challenging.  Although we can get close, color is never an exact science and variations will occur.  An exact color match is vulnerable to many factors, including the fact that we use a hot press to combine the rubber surface and cushion backing.  Heat from the press often causes the color to lighten. Typically, we can get close to most PMS colors, but the final color may be a few shades off.  For the PMS color to be as close as possible, we require additional time to create the proof sketch.  Specific PMS colors may be matched for a one-time additional fee per PMS color.

Cleaning Instructions

SuperScrape Impressions mats can be commercially laundered (see laundering instructions) or cleaned using the instructions below.

  • Scrub with a deck brush (when needed) using detergent with a neutral pH.
  • Rinse with a hose or pressure washer.
  • Lay flat or hang to dry.

Laundering Instructions

SuperScrape Impressions mats can be commercially laundered periodically to remove soil. The formula below does not require extensive mechanical action or drying, however mats can be dried if necessary.

  1. Flush 2-3 minutes, medium water level, cold
  2. Break 5-10 minutes, high water level, 120 degrees F (49 degrees C)
  3. Rinse 2 minutes, high water level, cold
  4. Rinse 2 minutes, high water level, cold
  5. Drain 2 minutes
  6. Lay mats flat following removal from washer.

If you dry the mats in the dryer, allow to cool before rolling.

Search