CONSTRUCTION
Material: Nitrile rubber
Logo/Image Material: Polymetric film
OVERALL MAT THICKNESS: 3/16 inch (0.1875" )
STANDARDS & TESTING
- Passes flammability standard DOC-FF1-70
Design Specifications
Floor Impressions are all rubber mats that feature a digital imprint. A digital imprint allows for much more detail; and bright, vivid colors can be easily achieved. PMS colors may be matched for an additional fee.* Floor Impressions mats are available in two pattern options - diamond and smooth. Smooth is only available up to size 3' x 5'.
- Minimum Text Height: 1/4" for diamond top and 1/8" for smooth top (includes lowercase text)
- Minimum Line Thickness: 1/16"
These text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.
The background color of the imprint area should not be set to white. It is difficult to keep the logo clean through the manufacturing process.
Solid color designs are not available and cannot be produced. The print area must be comprised of text and/or logo.
Powerclips in CorelDraw files must be avoided.
*We will do our best to match a PMS color, however, color matching can be extremely challenging. Although we can get close, color is never an exact science and variations will occur. An exact color match is vulnerable to many factors, including the fact that we use a hot press to combine the rubber surface and cushion backing. Heat from the press often causes the color to lighten. Typically, we can get close to most PMS colors, but the final color may be a few shades off. For the PMS color to be as close as possible, we require additional time to create the proof sketch. Specific PMS colors may be matched for a one-time additional fee per PMS color. A maximum of 4 PMS colors may be used in any given design.
Cleaning Instructions
Floor Impressions mats can be cleaned by using detergent with a neutral pH, and rinsing with a hose. Mats should be laid flat or hung to dry.